| ID |
Image |
Description |
Pieces |
Cost($) |
Shop! |
| 12440 |
 |
MAKE YOUR OWN TAMIYA CHARGING ADAPTER-
Connector: Tamiya Female Select the other end you would like in checkout WIRE: will depend on connector selected in checkout |
1 |
2.00USD |
 |
|
| 12102 |
 |
MAKE YOUR OWN DEANS FEMALE CHARGING ADAPTER-
Connector: Deans Ultra Female Select the other end you would like in checkout WIRE: will depend on connector selected in checkout
|
1 |
4.50USD |
 |
|
| 12004 |
 |
MAKE YOUR OWN BANANA PLUG CHARGING ADAPTER-
Connector: Gold plated 4mm Male Banana plug Select the other end you would like in checkout WIRE: will depend on connector selected in checkout Lead length: 6"
|
1 |
5.50USD |
 |
|
| 11326 |
 |
Male banana jacks to Aligator clips Weight: .8oz. |
1 |
3.50USD |
 |
|
| 11057 |
 |
Deans Charging adapter. Female Tamiya to Deans Male. Wire: 14ga silicone Weight: 1oz. |
1 |
4.50USD |
 |
|
| 11275 |
 |
Dual Parallel Charging Adapter Deans Ultra female to (2) Deans ultra males.. FEATURES: Designed to allow you to charge two packs (same mAh capacity) at once ON ANY CHARGER. High quality fine strand 16ga silicone wire. Weight: .5oz. NOTE--BOTH PACKS MUST BE FULLY DISCHARGED TO .9V PER CELL. FAILURE TO DISCHARGE TO THE SAME VOLTAGE WILL RESULT IN UNEQUAL CHARGING AND OVERHEATING. |
1 |
8.95USD |
 |
|
| 12581 |
 |
Dual Parallel Charging Adapter 2" leads Deans Ultra female to (2) Deans ultra males.. FEATURES: Designed to allow you to charge two packs (same mAh capacity) at once ON ANY CHARGER. High quality fine strand 16ga silicone wire. Weight: 1oz. NOTE--BOTH PACKS MUST BE FULLY DISCHARGED TO .9V PER CELL. FAILURE TO DISCHARGE TO THE SAME VOLTAGE WILL RESULT IN UNEQUAL CHARGING AND OVERHEATING. |
1 |
7.95USD |
 |
|
| 12582 |
 |
DEANS 16GA SERIES ADAPTER- 2" leads Deans Ultra female to (2) Deans ultra males.. FEATURES: Designed to allow you to charge or discharge two packs (same mAh capacity) at once ON ANY CHARGER. High quality fine strand 16ga silicone wire. Weight: 1oz. NOTE--BOTH PACKS MUST BE FULLY DISCHARGED TO .9V PER CELL. FAILURE TO DISCHARGE TO THE SAME VOLTAGE WILL RESULT IN UNEQUAL CHARGING AND OVERHEATING. |
1 |
7.95USD |
 |
|
| 12691 |
 |
DEANS SERIES ADAPTER- 2" leads Deans Ultra female to (2) Deans ultra males.. FEATURES: Designed to allow you to charge or discharge two packs (same mAh capacity) at once ON ANY CHARGER. High quality fine strand 12ga silicone wire. Weight: 2oz. NOTE--BOTH PACKS MUST BE FULLY DISCHARGED TO .9V PER CELL. FAILURE TO DISCHARGE TO THE SAME VOLTAGE WILL RESULT IN UNEQUAL CHARGING AND OVERHEATING. |
1 |
8.95USD |
 |
|
| 11587 |
 |
Traxxas TRX Male to Female Tamiya Charging Adapter WIRE: 14ga silicone Weight: .2oz. |
1 |
4.50USD |
 |
|
| 12103 |
 |
Traxxas TRX series E-revo 1/10 adapter- connect 2 packs to double the voltage to 14.4v Wire Size: fine strand 13ga silicone. Weight; 1oz. |
1 |
7.95USD |
 |
|
| 12097 |
 |
Traxxas TRX parallel E-revo 1/16 adapter- connect 2 packs to double the capacity...run twice as long @ 7.2v Wire Size: fine strand 16ga silicone. Weight; .4oz. |
1 |
7.95USD |
 |
|
| 12096 |
 |
Traxxas TRX series E-revo 1/16 adapter- connect 2 packs to double the voltage to 14.4v Wire Size: fine strand 16ga silicone. Weight; .4oz. |
1 |
7.95USD |
 |
|
| 11578 |
 |
Sermos (Anderson Power Pole) Charging adapter. Female Tamiya to Sermos. Wire: 14ga silicone Weight; .2oz. |
1 |
4.50USD |
 |
|
| 10032 |
 |
Female Tamiya to Female Red BEC Adapter Weight; .1oz. |
1 |
3.00USD |
 |
|
| 11325 |
 |
Female Tamiya to Female Universal (Hitec, Airtronics, JR) Weight: .1oz. |
1 |
3.00USD |
 |
|
| 12454 |
 |
Female Tamiya to Female Old Airtronics / Sanwa. Not compatible with JR. Weight: .1oz. |
1 |
3.00USD |
 |
|
| 10033 |
 |
Female Tamiya to Female Futaba "J" Weight; .1oz. |
1 |
3.00USD |
 |
|
| 11591 |
 |
Losi Micro-T to Female Tamiya Peak Charging Adapter. Weight: .1oz. |
1 |
3.50USD |
 |
|
| 11425 |
 |
Losi Mini-T Peak Charging Adapter. Female Mini-T connector to Female Tamiya. Weight: .2oz. |
1 |
3.50USD |
 |
|
| 11510 |
 |
9 volt to Female Tamiya charging adapter Amperage Rating: 3 Amps Wire Size: 22awg Length: 3" Weight: .2oz. Application: JR Z-1, XR2i, XR3i, XS3, XS3 PRO, SPEKTRUM DX2, DX2.0, DX3, DX3.0, MAX, DX3 Tx Battery Packs |
1 |
3.50USD |
 |
|
| 12015 |
 |
Hitec Tx Charging Adapter (NOT Mini-T) Female Hitec to Female Tamiya. Weight: .2oz. Application: Hitec Eclipse 7, Prism, Flash, Lynx FX, Focus SS Tx battery packs |
1 |
3.50USD |
 |
|
| 12016 |
 |
JR WHITE Tx CHARGING ADAPTER Female White JR to Female Tamiya. Weight: .2oz. Application: JR DX6, DX7 |
1 |
3.50USD |
 |
|
| 12023 |
 |
2 Cell LiPO Charging Adapter- Thunder Power
Adapts Thunder Power to Eflite/Align Charger
|
1 |
3.99USD |
 |
|
| 12024 |
 |
3 Cell LiPO Charging Adapter- Thunder Power
Adapts Thunder Power to Eflite/Align Charger
|
1 |
3.99USD |
 |
|
| 11533 |
 |
Hitech and JR Transmitter charging adapter Male 5.5mm X 2.1mm to Female Tamiya Polarity: Center Negative Amperage Rating: 3 Amps Wire Size: 22awg Length: 3" Note: recommended maximum charge rate 500mA Weight: .5oz.
|
1 |
3.50USD |
 |
|
| 11885 |
 |
JR XS3 & EFLITE CCPM CHARGING ADAPTER Peak charge your batteries in your radio Male 5.5mm X 2.1mm to Female Tamiya Polarity: Negative Center Amperage Rating: 3 Amps Wire Size: 22awg Length: 3" Note: recommended maximum charge rate 600mA Weight: .5oz.
|
1 |
3.50USD |
 |
|
| 12025 |
 |
MINELAB EXCALBUR CHARGING ADAPTER Male 5.5mm X 2.1mm to Female Tamiya Center Positive Amperage Rating: 3 Amps Wire Size: 22awg Length: 3" Weight: 1oz |
1 |
3.50USD |
 |
|
| 12241 |
 |
HITEC AURORA 9 CHARGING ADAPTER Male 3.5mm X 1.7mm to Female Tamiya Center Positive Amperage Rating: 3 Amps Wire Size: 22awg
|
1 |
3.50USD |
 |
|
| 12459 |
 |
Female Power plug charging adapter 5.5mm X 2.1mm to Female Tamiya Polarity: Center POSITIVE Amperage Rating: 10 Amps Wire Size: 18awg Length: 4" Weight: .5oz.
|
1 |
3.50USD |
 |
|
| 12460 |
 |
Female Power plug charging adapter 5.5mm X 2.1mm to Female Tamiya Polarity: Center NEGITIVE Amperage Rating: 10 Amps Wire Size: 18awg Length: 4" Weight: .5oz.
|
1 |
3.50USD |
 |
|
| 12576 |
 |
Alligator Clip Charging Adapter. Alligator to Female Tamiya. Weight: .2oz. |
1 |
2.50USD |
 |
|
| 10071 |
 |
Large Female Tamiya to Mini Male Kyosho. Note: Male mini connector round pole negative square pole positive specifically for Standard battery packs. Weight: .2oz. |
1 |
3.00USD |
 |
|
| 10070 |
 |
Large Female Tamiya to Mini Male Kyosho. Note: Male mini connector round pole positive, square pole negative specifically for Airsoft battery packs. Weight; .2oz. |
1 |
3.50USD |
 |
|
| 10876 |
 |
Large male Kyosho to Mini Female Tamiya. Note: Female mini connector round pole positve, square pole negative specifically for Airsoft battery packs. Weight: .2oz. |
1 |
3.50USD |
 |
|
| 11082 |
 |
Airsoft Extension Cable: Mini Female Tamiya-Mini Male Kyosho, round pole positive, square pole negative specifically for Airsoft battery packs. Length: 8.5-9.0" (CA CQB Stock cable) Note: if you need a specific length just note the length in the customer comments section. Weight: .6oz. |
1 |
4.50USD |
 |
|
| 10233 |
 |
Dual Parallel Charging Adapter- Large female Tamiya to dual large male Tamiya. FEATURES: Designed to allow you to charge two packs (same mAh capacity) at once ON ANY CHARGER. High quality fine strand silicone wire. Works with large Airsoft packs also. Weight: 1oz. NOTE--BOTH PACKS MUST BE FULLY DISCHARGED TO .9V PER CELL. FAILURE TO DISCHARGE TO THE SAME VOLTAGE WILL RESULT IN UNEQUAL CHARGING AND OVERHEATING.
|
1 |
5.95USD |
 |
|
| 10146 |
 |
Dual Parallel Charging Adapter- Large female Tamiya to dual Airsoft mini male Tamiya FEATURES: Designed to allow you to charge two packs (same mAh capacity) at once ON ANY CHARGER. High quality fine strand silicone wire. Weight; 1oz. NOTE--BOTH PACKS MUST BE FULLY DISCHARGED TO .9V PER CELL. FAILURE TO DISCHARGE TO THE SAME VOLTAGE WILL RESULT IN UNEQUAL CHARGING AND OVERHEATING.
|
1 |
5.95USD |
 |
|
| 10234 |
 |
Dual Parallel Charging Adapter- Large female Tamiya to dual mini male Tamiya FEATURES: Designed to allow you to charge two packs (same mAh capacity) at once ON ANY CHARGER. High quality fine strand silicone wire. Weight: 1oz. NOTE--BOTH PACKS MUST BE FULLY DISCHARGED TO .9V PER CELL. FAILURE TO DISCHARGE TO THE SAME VOLTAGE WILL RESULT IN UNEQUAL CHARGING AND OVERHEATING.
|
1 |
5.95USD |
 |
|
| 12165 |
 |
Thermal Sensor for #11502 Peak Charger WARNING- THIS THERMAL ONLY IS COMPATIBLE WITH #11502 UNIVERSAL CHARGER..
Attach to your battery and during charging and shut off the charger thermally. |
1 |
3.50USD |
 |
|